General Purpose
Correspondence analysis is a descriptive/exploratory technique designed to analyze simple two-way and multi-way tables containing some measure of correspondence between the rows and columns. The results provide information which is similar in nature to those produced by Factor Analysis techniques, and they allow one to explore the structure of categorical variables included in the table. The most common kind of table of this type is the two-way frequency crosstabulation table (see, for example, Basic Statistics or Log-Linear).
In a typical correspondence analysis, a crosstabulation table of frequencies is first standardized, so that the relative frequencies across all cells sum to 1.0. One way to state the goal of a typical analysis is to represent the entries in the table of relative frequencies in terms of the distances between individual rows and/or columns in a low-dimensional space. This is best illustrated by a simple example, which will be described below. There are several parallels in interpretation between correspondence analysis and Factor Analysis, and some similar concepts will also be pointed out below.
For a comprehensive description of this method, computational details, and its applications (in the English language), refer to the classic text by Greenacre (1984). These methods were originally developed primarily in France by Jean-Paul Benzérci in the early 1960's and 1970's (e.g., see Benzérci, 1973; see also Lebart, Morineau, and Tabard, 1977), but have only more recently gained increasing popularity in English-speaking countries (see, for example, Carrol, Green, and Schaffer, 1986; Hoffman and Franke, 1986). (Note that similar techniques were developed independently in several countries, where they were known as optimal scaling, reciprocal averaging, optimal scoring, quantification method, or homogeneity analysis). In the following paragraphs, a general introduction to correspondence analysis will be presented.
Overview. Suppose you collected data on the smoking habits of different employees in a company. The following data set is presented in Greenacre (1984, p. 55).
| Smoking Category | |||||
|---|---|---|---|---|---|
| Staff Group |
(1) None |
(2) Light |
(3) Medium |
(4) Heavy |
Row Totals |
(1) Senior Managers (2) Junior Managers (3) Senior Employees (4) Junior Employees (5) Secretaries |
4 4 25 18 10 |
2 3 10 24 6 |
3 7 12 33 7 |
2 4 4 13 2 |
11 18 51 88 25 |
| Column Totals | 61 | 45 | 62 | 25 | 193 |
Mass. To continue with the simpler example of the two-way table presented above, computationally, the program will first compute the relative frequencies for the frequency table, so that the sum of all table entries is equal to 1.0 (each element will be divided by the total, i.e., 193). One could say that this table now shows how one unit of mass is distributed across the cells. In the terminology of correspondence analysis, the row and column totals of the matrix of relative frequencies are called the row mass and column mass, respectively.
Inertia. The term inertia in correspondence analysis is used by analogy with the definition in applied mathematics of "moment of inertia," which stands for the integral of mass times the squared distance to the centroid (e.g., Greenacre, 1984, p. 35). Inertia is defined as the total Pearson Chi-square for the two-way divided by the total sum (193 in the present example).
Inertia and row and column profiles. If the rows and columns in a table are completely independent of each other, the entries in the table (distribution of mass) can be reproduced from the row and column totals alone, or row and column profiles in the terminology of correspondence analysis. According to the well-known formula for computing the Chi-square statistic for two-way tables, the expected frequencies in a table, where the column and rows are independent of each other, are equal to the respective column total times the row total, divided by the grand total. Any deviations from the expected values (expected under the hypothesis of complete independence of the row and column variables) will contribute to the overall Chi-square. Thus, another way of looking at correspondence analysis is to consider it a method for decomposing the overall Chi-square statistic (or Inertia=Chi- square/Total N) by identifying a small number of dimensions in which the deviations from the expected values can be represented. This is similar to the goal of Factor Analysis, where the total variance is decomposed, so as to arrive at a lower-dimensional representation of the variables that allows one to reconstruct most of the variance/covariance matrix of variables.
Analyzing rows and columns. This simple example began with a discussion of the row-points in the table shown above. However, one may rather be interested in the column totals, in which case one could plot the column points in a small-dimensional space, which satisfactorily reproduces the similarity (and distances) between the relative frequencies for the columns, across the rows, in the table shown above. In fact it is customary to simultaneously plot the column points and the row points in a single graph, to summarize the information contained in a two-way table.
Reviewing results. Let us now look at some of the results for the table shown above. First, shown below are the so-called singular values , eigenvalues, percentages of inertia explained, cumulative percentages, and the contribution to the overall Chi- square.
| Eigenvalues and Inertia for all Dimensions Input Table (Rows x Columns): 5 x 4 Total Inertia = .08519 Chi² = 16.442 |
|||||
|---|---|---|---|---|---|
| No. of Dims |
Singular Values |
Eigen- Values |
Perc. of Inertia |
Cumulatv Percent |
Chi Squares |
| 1 2 3 |
.273421 .100086 .020337 |
.074759 .010017 .000414 |
87.75587 11.75865 .48547 |
87.7559 99.5145 100.0000 |
14.42851 1.93332 .07982 |
First, it appears that, with a single dimension, 87.76% of the inertia can be "explained," that is, the relative frequency values that can be reconstructed from a single dimension can reproduce 87.76% of the total Chi-square value (and, thus, of the inertia) for this two-way table; two dimensions allow you to explain 99.51%.
Maximum number of dimensions. Since the sums of the frequencies across the columns must be equal to the row totals, and the sums across the rows equal to the column totals, there are in a sense only (no. of columns-1) independent entries in each row, and (no. of rows-1) independent entries in each column of the table (once you know what these entries are, you can fill in the rest based on your knowledge of the column and row marginal totals). Thus, the maximum number of eigenvalues that can be extracted from a two- way table is equal to the minimum of the number of columns minus 1, and the number of rows minus 1. If you choose to extract (i.e., interpret) the maximum number of dimensions that can be extracted, then you can reproduce exactly all information contained in the table.
Row and column coordinates. Next look at the coordinates for the two-dimensional solution.
| Row Name | Dim. 1 | Dim. 2 | (1) Senior Managers (2) Junior Managers (3) Senior Employees (4) Junior Employees (5) Secretaries |
-.065768 .258958 -.380595 .232952 -.201089 |
.193737 .243305 .010660 -.057744 -.078911 |
|---|
What is important are the distances of the points in the two-dimensional display, which are informative in that row points that are close to each other are similar with regard to the pattern of relative frequencies across the columns. If you have produced this plot you will see that, along the most important first axis in the plot, the Senior employees and Secretaries are relatively close together on the left side of the origin (scale position 0). If you looked at the table of relative row frequencies (i.e., frequencies standardized, so that their sum in each row is equal to 100%), you will see that these two groups of employees indeed show very similar patterns of relative frequencies across the categories of smoking intensity.
| Percentages of Row Totals | |||||
|---|---|---|---|---|---|
| Smoking Category | |||||
| Staff Group |
(1) None |
(2) Light |
(3) Medium |
(4) Heavy |
Row Totals |
(1) Senior Managers (2) Junior Managers (3) Senior Employees (4) Junior Employees (5) Secretaries |
36.36 22.22 49.02 20.45 40.00 |
18.18 16.67 19.61 27.27 24.00 |
27.27 38.89 23.53 37.50 28.00 |
18.18 22.22 7.84 14.77 8.00 |
100.00 100.00 100.00 100.00 100.00 |
| Smoking category |
Dim. 1 |
Dim. 2 |
None Light Medium Heavy |
-.393308 .099456 .196321 .293776 |
.030492 -.141064 -.007359 .197766 |
|---|
Compatibility of row and column coordinates. It is customary to summarize the row and column coordinates in a single plot. However, it is important to remember that in such plots, one can only interpret the distances between row points, and the distances between column points, but not the distances between row points and column points.
To continue with this example, it would not be appropriate to say that the category None is similar to Senior Employees (the two points are very close in the simultaneous plot of row and column coordinates). However, as was indicated earlier, it is appropriate to make general statements about the nature of the dimensions, based on which side of the origin particular points fall. For example, because category None is the only column point on the left side of the origin for the first axis, and since employee group Senior Employees also falls onto that side of the first axis, one may conclude that the first axis separates None smokers from the other categories of smokers, and that Senior Employees are different from, for example, Junior Employees, in that there are relatively more non-smoking Senior Employees.
Scaling of the coordinates (standardization options). Another important decision that the analyst must make concerns the scaling of the coordinates. The nature of the choice pertains to whether or not you want to analyze the relative row percentages, column percentages, or both. In the context of the example described above, the row percentages were shown to illustrate how the patterns of those percentages across the columns are similar for points which appear more closely together in the graphical display of the row coordinates. Put another way, the coordinates are based on the analysis of the row profile matrix, where the sum of the table entries in a row, across all columns, is equal to 1.0 (each entry rij in the row profile matrix can be interpreted as the conditional probability that a case belongs to column j, given its membership in row i). Thus, the coordinates are computed so as to maximize the differences between the points with respect to the row profiles (row percentages). The row coordinates are computed from the row profile matrix, the column coordinates are computed from the column profile matrix.
A fourth option, Canonical standardization (see Gifi, 1981), is also provided, and it amounts to a standardization of the columns and rows of the matrix of relative frequencies. This standardization amounts to a rescaling of the coordinates based on the row profile standardization and the column profile standardization, and this type of standardization is not widely used. Note also that a variety of other custom standardizations can be easily performed if you have the raw eigenvalues and eigenvector matrices.
Metric of coordinate system. In several places in this introduction, the term distance was (loosely) used to refer to the differences between the pattern of relative frequencies for the rows across the columns, and columns across the rows, which are to be reproduced in a lower-dimensional solution as a result of the correspondence analysis. Actually, these distances represented by the coordinates in the respective space are not simple Euclidean distances computed from the relative row or column frequencies, but rather, they are weighted distances. Specifically, the weighting that is applied is such that the metric in the lower- dimensional space is a Chi-square metric, provided that (1) you are comparing row points, and chose either row-profile standardization or both row- and column-profile standardization, or (2) you are comparing column points, and chose either column-profile standardization or both row- and column-profile standardization.
In that case (but not if you chose the canonical standardization), the squared Euclidean distance between, for example, two row points i and i' in the respective coordinate system of a given number of dimensions actually approximates a weighted (i.e., Chi-square) distance between the relative frequencies (see Hoffman and Franke, 1986, formula 21):
dii '2 = 
j (1/cj (pij /ri - p2i ' j /ri '))
In this formula, dii ' stands for the squared distance between the two points, cj stands for the column total for the j'th column of the standardized frequency table (where the sum of all entries or mass is equal to 1.0), pij stands for the individual cell entries in the standardized frequency table (row i, column j), ri stands for the row total for the i'th column of the relative frequency table, and the summation is over the columns of the table. To reiterate, only the distances between row points, and correspondingly, between column points are interpretable in this manner; the distances between row points and column points cannot be interpreted.
Judging the quality of a solution. A number of auxiliary statistics are reported, to aid in the evaluation of the quality of the respective chosen numbers of dimensions. The general concern here is that all (or at least most) points are properly represented by the respective solution, that is, that their distances to other points can be approximated to a satisfactory degree. Shown below are all statistics reported for the row coordinates for the example table discussed so far, based on a one-dimensional solution only (i.e., only one dimension is used to reconstruct the patterns of relative frequencies across the columns).
| Row Coordinates and Contributions to Inertia | ||||||
|---|---|---|---|---|---|---|
| Staff Group |
Coordin. Dim.1 |
Mass |
Quality |
Relative Inertia |
Inertia Dim.1 |
Cosine² Dim.1 |
(1) Senior Managers (2) Junior Managers (3) Senior Employees (4) Junior Employees (5) Secretaries |
-.065768 .258958 -.380595 .232952 -.201089 |
.056995 .093264 .264249 .455959 .129534 |
.092232 .526400 .999033 .941934 .865346 |
.031376 .139467 .449750 .308354 .071053 |
.003298 .083659 .512006 .330974 .070064 |
.092232 .526400 .999033 .941934 .865346 |
Coordinates. The first numeric column shown in the table above contains the coordinates, as discussed in the previous paragraphs. To reiterate, the specific interpretation of these coordinates depends on the standardization chosen for the solution (see above). The number of dimensions is chosen by the user (in this case we chose only one dimension), and coordinate values will be shown for each dimension (i.e., there will be one column with coordinate values for each dimension).
Mass. The Mass column contains the row totals (since these are the row coordinates) for the table of relative frequencies (i.e., for the table where each entry is the respective mass, as discussed earlier in this section). Remember that the coordinates are computed based on the matrix of conditional probabilities shown in the Mass column.
Quality. The Quality column contains information concerning the quality of representation of the respective row point in the coordinate system defined by the respective numbers of dimensions, as chosen by the user. In the table shown above, only one dimension was chosen, and the numbers in the Quality column pertain to the quality of representation in the one-dimensional space. To reiterate, computationally, the goal of the correspondence analysis is to reproduce the distances between points in a low-dimensional space. If you extracted (i.e., interpreted) the maximum number of dimensions (which is equal to the minimum of the number of rows and the number of columns, minus 1), you could reconstruct all distances exactly. The Quality of a point is defined as the ratio of the squared distance of the point from the origin in the chosen number of dimensions, over the squared distance from the origin in the space defined by the maximum number of dimensions (remember that the metric here is Chi-square, as described earlier). By analogy to Factor Analysis, the quality of a point is similar in its interpretation to the communality for a variable in factor analysis.
Note that the Quality measure reported is independent of the chosen method of standardization, and always pertains to the default standardization (i.e., the distance metric is Chi-square, and the quality measure can be interpreted as the "proportion of Chi- square accounted for" for the respective row, given the respective number of dimensions). A low quality means that the current number of dimensions does not well represent the respective row (or column). In the table shown above, the quality for the first row (Senior Managers) is less than .1, indicating that this row point is not well represented by the one- dimensional representation of the points.
Relative inertia. The Quality of a point (see above) represents the proportion of the contribution of that point to the overall inertia (Chi-square) that can be accounted for by the chosen number of dimensions. However, it does not indicate whether or not, and to what extent, the respective point does in fact contribute to the overall inertia (Chi- square value). The relative inertia represents the proportion of the total inertia accounted for by the respective point, and it is independent of the number of dimensions chosen by the user. Note that a particular solution may represent a point very well (high Quality), but the same point may not contribute much to the overall inertia (e.g., a row point with a pattern of relative frequencies across the columns that is similar to the average pattern across all rows).
Relative inertia for each dimension. This column contains the relative contribution of the respective (row) point to the inertia "accounted for" by the respective dimension. Thus, this value will be reported for each (row or column) point, for each dimension.
Cosine˛ (quality or squared correlations with each dimension). This column contains the quality for each point, by dimension. The sum of the values in these columns across the dimensions is equal to the total Quality value discussed above (since in the example table above, only one dimension was chose, the values in this column are identical to the values in the overall Quality column). This value may also be interpreted as the "correlation" of the respective point with the respective dimension. The term Cosine˛ refers to the fact that this value is also the squared cosine value of the angle the point makes with the respective dimension (refer to Greenacre, 1984, for details concerning the geometric aspects of correspondence analysis).
A note about "statistical significance." It should be noted at this point that correspondence analysis is an exploratory technique. Actually, the method was developed based on a philosophical orientation that emphasizes the development of models that fit the data, rather than the rejection of hypotheses based on the lack of fit (Benzecri's "second principle" states that "The model must fit the data, not vice versa;" see Greenacre, 1984, p. 10). Therefore, there are no statistical significance tests that are customarily applied to the results of a correspondence analysis; the primary purpose of the technique is to produce a simplified (low- dimensional) representation of the information in a large frequency table (or tables with similar measures of correspondence).
| To index |
Supplementary Points
The introductory section provides an overview of how to interpret the coordinates and related statistics computed in a correspondence analysis. An important aid in the interpretation of the results from a correspondence analysis is to include supplementary row or column points, that were not used to perform the original analyses. For example, consider the following results which are based on the example given in the introductory (based on Greenacre, 1984).
| Row Name | Dim. 1 | Dim. 2 | (1) Senior Managers (2) Junior Managers (3) Senior Employees (4) Junior Employees (5) Secretaries |
-.065768 .258958 -.380595 .232952 -.201089 |
.193737 .243305 .010660 -.057744 -.078911 |
National Average | -.258368 | -.117648 |
|---|
While this type of information could have been easily gleaned from the original frequency table (that was used as the input to the analysis), in the case of very large tables, such conclusions may not be as obvious.
Quality of representation of supplementary points. Another interesting result for supplementary points concerns the quality of their representation in the chosen number of dimensions (see the introductory section for a more detailed discussion of the concept of quality of representation). To reiterate, the goal of the correspondence analysis is to reproduce the distances between the row or column coordinates (patterns of relative frequencies across the columns or rows, respectively) in a low-dimensional solution. Given such a solution, one may ask whether particular supplementary points of interest can be represented equally well in the final space, that is, whether or not their distances from the other points in the table can also be represented in the chosen numbers of dimensions. Shown below are the summary statistics for the original points, and the supplementary row point National Average, for the two-dimensional solution.
| Staff Group |
Quality |
Cosine² Dim.1 |
Cosine² Dim.2 |
|---|---|---|---|
| (1) Senior Managers (2) Junior Managers (3) Senior Employees (4) Junior Employees (5) Secretaries |
.892568 .991082 .999817 .999810 .998603 |
.092232 .526400 .999033 .941934 .865346 |
.800336 .464682 .000784 .057876 .133257 |
| National Average | .761324 | .630578 | .130746 |
| To index |
Multiple Correspondence Analysis (MCA)
Multiple correspondence analysis (MCA) may be considered to be an extension of simple correspondence analysis to more than two variables. For an introductory overview of simple correspondence analysis, refer to the introductory section . Multiple correspondence analysis is a simple correspondence analysis carried out on an indicator (or design) matrix with cases as rows and categories of variables as columns. Actually, one usually analyzes the inner product of such a matrix, called the Burt Table in an MCA; this will be discussed later. However, to clarify the interpretation of the results from a multiple correspondence analysis, it is easier to discuss the simple correspondence analysis of an indicator or design matrix.
Indicator or design matrix. Consider again the simple two-way table presented in the introductory section:
| Smoking Category | |||||
|---|---|---|---|---|---|
| Staff Group |
(1) None |
(2) Light |
(3) Medium |
(4) Heavy |
Row Totals |
(1) Senior Managers (2) Junior Managers (3) Senior Employees (4) Junior Employees (5) Secretaries |
4 4 25 18 10 |
2 3 10 24 6 |
3 7 12 33 7 |
2 4 4 13 2 |
11 18 51 88 25 |
| Column Totals | 61 | 45 | 62 | 25 | 193 |
| Staff Group | Smoking | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Case Number |
Senior Manager |
Junior Manager |
Senior Employee |
Junior Employee |
Secretary |
None |
Light |
Medium |
Heavy |
| 1 2 3 4 5 ... ... ... 191 192 193 |
1 1 1 1 1 . . . 0 0 0 |
0 0 0 0 0 . . . 0 0 0 |
0 0 0 0 0 . . . 0 0 0 |
0 0 0 0 0 . . . 0 0 0 |
0 0 0 0 0 . . . 1 1 1 |
1 1 1 1 0 . . . 0 0 0 |
0 0 0 0 1 . . . 0 0 0 |
0 0 0 0 0 . . . 1 0 0 |
0 0 0 0 0 . . . 0 1 1 |
Analyzing the design matrix. If you now analyzed this data file (design or indicator matrix) shown above as if it were a two-way frequency table, the results of the correspondence analysis would provide column coordinates that would allow you to relate the different categories to each other, based on the distances between the row points, i.e., between the individual cases. In fact, the two-dimensional display you would obtain for the column coordinates would look very similar to the combined display for row and column coordinates, if you had performed the simple correspondence analysis on the two-way frequency table (note that the metric will be different, but the relative positions of the points will be very similar).
More than two variables. The approach to analyzing categorical data outlined above can easily be extended to more than two categorical variables. For example, the indicator or design matrix could contain two additional variables Male and Female, again coded 0 and 1, to indicate the subjects' gender; and three variables could be added to indicate to which one of three age groups a case belongs. Thus, in the final display, one could represent the relationships (similarities) between Gender, Age, Smoking habits, and Occupation (Staff Groups).
Fuzzy coding. It is not necessary that each case is assigned exclusively to only one category of each categorical variable. Rather than the 0-or-1 coding scheme, one could enter probabilities for membership in a category, or some other measure that represents a fuzzy rule for group membership. Greenacre (1984) discusses different types of coding schemes of this kind. For example, suppose in the example design matrix shown earlier, you had missing data for a few cases regarding their smoking habits. Instead of discarding those cases entirely from the analysis (or creating a new category Missing data), you could assign to the different smoking categories proportions (which should add to 1.0) to represent the probabilities that the respective case belongs to the respective category (e.g., you could enter proportions based on your knowledge about estimates for the national averages for the different categories).
Interpretation of coordinates and other results. To reiterate, the results of a multiple correspondence analysis are identical to the results you would obtain for the column coordinates from a simple correspondence analysis of the design or indicator matrix. Therefore, the interpretation of coordinate values, quality values, cosine˛'s and other statistics reported as the results from a multiple correspondence analysis can be interpreted in the same manner as described in the context of the simple correspondence analysis (see introductory section), however, these statistics pertain to the total inertia associated with the entire design matrix.
Supplementary column points and "multiple regression" for categorical variables. Another application of the analysis of design matrices via correspondence analysis techniques is that it allows you to perform the equivalent of a Multiple Regression for categorical variables, by adding supplementary columns to the design matrix. For example, suppose you added to the design matrix shown earlier two columns to indicate whether or not the respective subject had or had not been ill over the past year (i.e., you could add one column Ill and another column Not ill, and again enter 0's and 1's to indicate each subject's health status). If, in a simple correspondence analysis of the design matrix, you added those columns as supplementary columns to the analysis, then (1) the summary statistics for the quality of representation (see the introductory section) for those columns would give you an indication of how well you can "explain" illness as a function of the other variables in the design matrix, and (2) the display of the column points in the final coordinate system would provide an indication of the nature (e.g., direction) of the relationships between the columns in the design matrix and the column points indicating illness; this technique (adding supplementary points to an MCA analysis) is also sometimes called predictive mapping.
The Burt table. The actual computations in multiple correspondence analysis are not performed on a design or indicator matrix (which, potentially, may be very large if there are many cases), but on the inner product of this matrix; this matrix is also called the Burt matrix. With frequency tables, this amounts to tabulating the stacked categories against each other; for example the Burt for the two-way frequency table presented earlier would look like this.
| Employee | Smoking | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| (1) | (2) | (3) | (4) | (5) | (1) | (2) | (3) | (4) | |
| (1) Senior Managers (2) Junior Managers (3) Senior Employees (4) Junior Employees (5) Secretaries (1) Smoking:None (2) Smoking:Light (3) Smoking:Medium (4) Smoking:Heavy |
11 0 0 0 0 4 2 3 2 |
0 18 0 0 0 4 3 7 4 |
0 0 51 0 0 25 10 12 4 |
0 0 0 88 0 18 24 33 13 |
0 0 0 0 25 10 6 7 2 |
4 4 25 18 10 61 0 0 0 |
2 3 10 24 6 0 45 0 0 |
3 7 12 33 7 0 0 62 0 |
2 4 4 13 2 0 0 0 25 |
Note that the off-diagonal elements in the partitions representing the crosstabulations of a variable against itself are equal to 0 in the table shown above. However, this is not necessarily always the case, for example, when the Burt was derived from a design or indicator matrix that included fuzzy coding of category membership (see above).
| To index |
Burt Tables
The Burt table is the result of the inner product of a design or indicator matrix, and the multiple correspondence analysis results are identical to the results one would obtain for the column points from a simple correspondence analysis of the indicator or design matrix (see also MCA).
For example, suppose you had entered data concerning the Survival for different Age groups in different Locations like this:
| SURVIVAL | AGE | LOCATION | ||||||
|---|---|---|---|---|---|---|---|---|
| Case No. | NO | YES | LESST50 | A50TO69 | OVER69 | TOKYO | BOSTON | GLAMORGN |
| 1 2 3 4 ... ... ... 762 763 764 |
0 1 0 0 . . . 1 0 0 |
1 0 1 1 . . . 0 1 1 |
0 1 0 0 . . . 0 1 0 |
1 0 1 0 . . . 1 0 1 |
0 0 0 1 . . . 0 0 0 |
0 1 0 0 . . . 1 0 0 |
0 0 1 0 . . . 0 1 0 |
1 0 0 1 . . . 0 0 1 |
If you denote the data (design or indicator matrix) shown above as matrix X, then matrix product X'X is a Burt table); shown below is an example of a Burt table that one might obtain in this manner.
| SURVIVAL | AGE | LOCATION | ||||||
|---|---|---|---|---|---|---|---|---|
| NO | YES | <50 | 50-69 | 69+ | TOKYO | BOSTON | GLAMORGN | |
| SURVIVAL:NO SURVIVAL:YES AGE:UNDER_50 AGE:A_50TO69 AGE:OVER_69 LOCATION:TOKYO LOCATION:BOSTON LOCATION:GLAMORGN |
210 0 68 93 49 60 82 68 |
0 554 212 258 84 230 171 153 |
68 212 280 0 0 151 58 71 |
93 258 0 351 0 120 122 109 |
49 84 0 0 133 19 73 41 |
60 230 151 120 19 290 0 0 |
82 171 58 122 73 0 253 0 |
68 153 71 109 41 0 0 221 |
The Burt table has a clearly defined structure. Overall, the data matrix is symmetrical. In the case of 3 categorical variables (as shown above), the data matrix consists 3 x 3 = 9 partitions, created by each variable being tabulated against itself, and against the categories of all other variables. Note that the sum of the diagonal elements in each diagonal partition (i.e., where the respective variables are tabulated against themselves) is constant (equal to 764 in this case).
The off-diagonal elements in each diagonal partition in this example are all 0. If the cases in the design or indicator matrix are assigned to categories via fuzzy coding (i.e., if probabilities are used to indicate likelihood of membership in a category, rather than 0/1 coding to indicate actual membership), then the off-diagonal elements of the diagonal partitions are not necessarily equal to 0.
| To index |
